Click here to go to the code of conduct  Click here to go to the galleries  Click here to go to the video page  Click here to go to the SW Meets page  Click here to sign up
Page 12 of 12 FirstFirst ... 2 10 11 12
Results 111 to 117 of 117

Thread: Marina Roadster 1.8TC Q67 GJA

  1. #111
    frequent forum contributor Club Member
    Join Date
    Jan 2016
    Location
    Rugby
    Posts
    77

    Re: Marina Roadster 1.8TC Q67 GJA

    Understand your concerns re exposing the internal fibre-glass but I reckon if you then sprayed/painted the inside of the hole with clear lacquer you should be able to avoid that?

  2. #112
    frequent forum contributor Club Member
    Join Date
    Nov 2011
    Location
    By Douarnenez Bay Finistere
    Posts
    310

    Re: Marina Roadster 1.8TC Q67 GJA

    liquid super glue, for its penetrating benefits? I use it to seal fibres etc in holes around prop shafts/rudders on model boats, haven't had probs over the last 20 years!
    Last edited by Tony Stott; 29-05-2017 at 02:17 PM.

  3. #113
    Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,028

    Re: Marina Roadster 1.8TC Q67 GJA

    I'm sure those are only two of many solutions, thanks guys, another thought is using underseal ?

  4. #114
    Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,028

    Re: Marina Roadster 1.8TC Q67 GJA

    Had to do this second anniversary pic comparison didn't I !
    Attached Images Attached Images

  5. #115
    frequent forum contributor Club Member
    Join Date
    Jan 2016
    Location
    Rugby
    Posts
    77

    Re: Marina Roadster 1.8TC Q67 GJA

    Can't wait to see next years.... or am I just wishing my life away?

  6. #116
    Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,028

    Re: Marina Roadster 1.8TC Q67 GJA

    The hood for this car had disintegrated over time, and the side screens are complete but rotten
    Prior to painting I had filled in the holes in the tub for the hood buttons.
    I have had used LWB hood in stock for a while, so thought I'd try fitting it, result !
    Attached Images Attached Images

  7. #117
    Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,028

    Re: Marina Roadster 1.8TC Q67 GJA

    OK so the sidescreens I don't have won't fit, but back in 2010 I made some from f/glass for Q249.
    When the car was sold the new owner did not want them, so just dust them off and it's playtime again.

    A project's only finished when it's finished - and I really must get round to painting the bonnet
    Attached Images Attached Images
    Last edited by dcunn; 16-06-2017 at 10:41 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •