Announcement

Collapse
No announcement yet.

rover v8 water pump pulley

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rover v8 water pump pulley

    Has anyone got a rover v8 short format water pump pulley?
    10mm single vee.
    Characterised by 3 mounting holes 9mm dia. and inside diameter approx 92 mm dia.
    Rimmers part no 602582 is too much money for me.

  • #2
    Re: rover v8 water pump pulley

    Some on eBay... for example.
    Marlin Roadster, LWB...1860 B Series + Ford Type 9
    Renault Espace 54mm front calipers, vented discs, cycle wings and adjustable tie-bars.

    Comment


    • #3
      Re: rover v8 water pump pulley

      Hi Will. I have a new pulley in stock, with slight variations on your dimensions. O/A dia 152mm, I/D 92mm, 8mm single V and three 7mm dia holes at 108 PCD. If of interest, my contact details are in Pitstop. Regards David.

      Comment


      • #4
        Re: rover v8 water pump pulley

        Try this £9.99
        YKC 1994 Roadster LWB 3.5 Rover V8

        Comment

        Working...
        X