Click here to go to the code of conduct  Click here to go to the galleries  Click here to go to the video page  Click here to go to the SW Meets page  Click here to sign up
Results 1 to 4 of 4

Thread: rover v8 water pump pulley

  1. #1
    forum contributor
    Join Date
    Apr 2016
    Posts
    9

    rover v8 water pump pulley

    Has anyone got a rover v8 short format water pump pulley?
    10mm single vee.
    Characterised by 3 mounting holes 9mm dia. and inside diameter approx 92 mm dia.
    Rimmers part no 602582 is too much money for me.

  2. #2
    Club Member lil_red_roadster's Avatar
    Join Date
    Nov 2011
    Location
    Telford, Shropshire
    Posts
    545

    Re: rover v8 water pump pulley

    Some on eBay... for example.
    Marlin Roadster, LWB...Rover T16 nasp + Ford Type 9. Emerald ECU & 160bhp.
    Now with Renault Espace 54mm front calipers, vented discs, cycle wings and adjustable tie-bars.

  3. #3
    frequent forum contributor Club Member
    Join Date
    Nov 2011
    Location
    Bakewell Derbyshire
    Posts
    211

    Re: rover v8 water pump pulley

    Hi Will. I have a new pulley in stock, with slight variations on your dimensions. O/A dia 152mm, I/D 92mm, 8mm single V and three 7mm dia holes at 108 PCD. If of interest, my contact details are in Pitstop. Regards David.

  4. #4
    frequent forum contributor Club Member Michael Turpin's Avatar
    Join Date
    Nov 2011
    Location
    Leeds
    Posts
    127

    Re: rover v8 water pump pulley


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •