my clutch is juddering where the best place to by one from.also do spline dia same thro range. can not find engine no. not on right hand side or anyware
Announcement
Collapse
No announcement yet.
clutch 1300 marina.
Collapse
X
-
Re: clutch 1300 marina.
Originally posted by victorday_31 View Postmy clutch is juddering where the best place to by one from.also do spline dia same thro range. can not find engine no. not on right hand side or anyware
Cant say that one supplier is better than the other.
Clutch judder is invariably due to a glazed flywheel/pressure plate, only visible once you strip everything apart. Pressure plate can be replaced, but the flywheel may require light machining, a second hand one, may be exactly the same.MOC member since 05/97
1984 Marlin Roadster SWB.
1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
Three core radiator, Renault Clio vented front discs.
The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.
Loads of Marlin Reference can be found documents here or there.
-
Re: clutch 1300 marina.
Originally posted by b_caswell View PostBefore you go pulling the box out to change the clutch, check the engine mountings are intact and its not the engine jumping up and down.MOC member since 05/97
1984 Marlin Roadster SWB.
1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
Three core radiator, Renault Clio vented front discs.
The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.
Loads of Marlin Reference can be found documents here or there.
Comment
Comment