Announcement

Collapse
No announcement yet.

Fuel pump for mk2 1300 a series

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Fuel pump for mk2 1300 a series

    Originally posted by listerjp2 View Post
    Hi all

    Spoke with Burlan again and an old timer who's worked there for some 30 years or more told me that the AZX 1818 will work as the only difference is the orientation of the inlet and outlet.
    Adrian
    For the benefit of others, who may not recognise names, Burlan, is in fact Burlen. http://burlen.co.uk/ the parent company of SU carb http://sucarb.co.uk , the experts!
    MOC member since 05/97
    1984 Marlin Roadster SWB.
    1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
    Three core radiator, Renault Clio vented front discs.
    The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.

    Loads of Marlin Reference can be found documents here or there.

    Comment


    • #17
      Re: Fuel pump for mk2 1300 a series

      Apologies for my dislexia I do rely on predictive text a lot and sometimes the computer has a mind of its own.

      Of course the company name is Burlen and whether you put Burlen or SU into Google you will get the same page.

      Regards

      Adrian


      Originally posted by stevejgreen View Post
      For the benefit of others, who may not recognise names, Burlan, is in fact Burlen. http://burlen.co.uk/ the parent company of SU carb ahttp://sucarb.co.uk , the experts!

      Comment


      • #18
        Re: Fuel pump for mk2 1300 a series

        OK, it's been a little while since I put the new fuel pump in and I can now report that it works fine.

        Job done and worth noting if you are in the market for a new fuel pump for your A Series engine.

        Adrian


        Originally posted by stevejgreen View Post
        For the benefit of others, who may not recognise names, Burlan, is in fact Burlen. http://burlen.co.uk/ the parent company of SU carb http://sucarb.co.uk , the experts!

        Comment


        • #19
          Re: Fuel pump for mk2 1300 a series

          Well done, Im just about to replace the (one broken) rubber bobbin mounts on JRR's Facet pump... I may remove the original mechanical pump as well, although maybe that's handy left in place as a backup!

          Whoops, I should start that new thread now!
          - 9th owner of T693 SSC possibly a factory built Ford based V8 Sportster
          - 4th owner of Q309 RNV, an early Cabrio built by Bob Copping, owned Doug & Liz Billings for 16 years
          - 9th Custodian of JRR 929D, Triumph Vitesse based special Paul Moorehouse built prior to the Triumph Roadster kits.
          - 8th owner of Roadster chassis number 2395. Now owned by Barry!
          - Builder of chassis number 2325 (PKK 989M) in the mid 80's. Now owned by Eric & Lynne.

          Comment


          • #20
            Re: Fuel pump for mk2 1300 a series

            Nice one Adrian, I may be referring to this thread when I finally get to start mine as I don’t know the condition of the fuel pump.

            Comment


            • #21
              Re: Fuel pump for mk2 1300 a series

              Originally posted by David View Post
              Well done, Im just about to replace the (one broken) rubber bobbin mounts on JRR's Facet pump... I may remove the original mechanical pump as well, although maybe that's handy left in place as a backup!

              Whoops, I should start that new thread now!
              David
              you may be able to superglue the torn rubber(Metalastic) mount.

              Failing that, the mounts are available from Terry (The UK importer of most fuel pumps and other associated parts).
              His Contact details are:
              Last edited by Ye Ol Ripper; 28-10-18, 11:23 AM.

              Comment


              • #22
                Re: Fuel pump for mk2 1300 a series

                Thanks for that, got some ordered now.
                - 9th owner of T693 SSC possibly a factory built Ford based V8 Sportster
                - 4th owner of Q309 RNV, an early Cabrio built by Bob Copping, owned Doug & Liz Billings for 16 years
                - 9th Custodian of JRR 929D, Triumph Vitesse based special Paul Moorehouse built prior to the Triumph Roadster kits.
                - 8th owner of Roadster chassis number 2395. Now owned by Barry!
                - Builder of chassis number 2325 (PKK 989M) in the mid 80's. Now owned by Eric & Lynne.

                Comment

                Working...
                X