Announcement

Collapse
No announcement yet.

Arm Rest

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Arm Rest

    I am in the last stages of my build concentrating on the inners of the cabin.
    I was at Stoneleigh this weekend and looked at the various ways members had fitted an arm rest over the handbrake, some were hand made but a number were using various moulded plastic units.
    Can anyone let me know what they used relating to the plastic units please. I have inculuded two pictures taken on Sunday

  • #2
    Re: Arm Rest

    Stewart
    I used the Sierra part suitable cut down to fit beteen the seats. Cut the bottom off all the way up to where it narrows. Cut a wedge from each corner to make it narrower then glass up the inside and fill it the cracks. Then all you have to do is spray with plastic primer and paint black. Black bumper paint works quite well for this, and you can recover the armrest in leather to finish. Picture of mine included.
    What happened to your pictures ?

    Attached Files

    Comment


    • #3
      Re: Arm Rest

      Thanks Peter, will be going down the breakers soon, as to pictures I did post 2.

      Comment

      Working...
      X