Announcement

Collapse
No announcement yet.

Ignition Wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ignition Wiring

    I am supposed to be an electrical engineer, however I am in big trouble on the ignition wiring for my Sportster with E30 2.5 litre straigt six BMW engine. I have no wiring loom beyond the engine plug and a variety of wiring diagrams which point me in oposite directions.
    Can anyone help with where to connect the engine plug? Signed desperate Graham

  • #2
    Re: Ignition Wiring

    Hi Graham
    I created a document for this but to make sense of it you will need, and I recommend that you use anyway, the car side of the engine plug.
    Please leave e-mail here or E-Mail me at: [email protected]. and I will send to you.

    Comment


    • #3
      Re: Ignition Wiring

      Hi
      I\'ve put together the following table. The table has the pin number, colour of the wires (this may vary depending on age of car) and purpose of pin.

      Not all of these items are required, eg the Active Check control / oil level sensor.

      http://www.msportster.co.uk/files/c101connector.txt



      Here is a link to a diagram
      http://forums.bimmerforums.com/forum/showpost.php?s=0694dc2f9d19db3a7e0755d9153dd2c2&am p;p=12652452&postcount=2

      Comment

      Working...
      X