Announcement

Collapse
No announcement yet.

Gap Berlinetta

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gap Berlinetta

    Happy New Year to all.
    Advise please on how to increase the gap between the dash and the steering wheel. The steering arm as already be extended wheel still very close to the dash. Boss extentions I've found are to small for the orginal boss.
    Thanks John

  • #2
    Re: Gap Berlinetta

    Hi John.
    I had this problem, here is how I addressed it.
    1, remove dash and steering column,
    2, get a mk1 sierra column and pull the bottom centre shaft out 4" further than standard. Weld 2 support brackets (made out of 40mm angle)down from the main bulkhead cross member and drill to suit the sierra column top bracket bolts, Cut the bottom 3" off the original outer steering column and use as a sleeve for the bottom column bush on the sierra unit,
    Should give you the clearance required

    Comment


    • #3
      Re: Gap Berlinetta

      Malc
      Thanks, will look into that.

      Comment


      • #4
        Re: Gap Berlinetta

        Malc,
        Up-date. I have made a 2.5" aluminium boss to fit onto the steering wheel boss. This saves the pain of removing/welding and brakets etc the column and saves time by hours. Plus it looks great.
        If members want a look I will send photo's.

        Comment


        • #5
          Re: Gap Berlinetta

          Message originally posted by: Malcolm Sherratt
          John.
          Sounds like a good fix,
          Please send a photo to Malcsherratt(at)hotmail.com

          Comment


          • #6
            Re: Gap Berlinetta

            Sent them yesterday 23rd Malc

            Comment


            • #7
              Re: Gap Berlinetta

              Mac,
              You get the photo's I sent ok ?

              Comment


              • #8
                Re: Gap Berlinetta

                Message originally posted by: Malcolm Sherratt
                Yes John Thanks a lot.

                Comment

                Working...
                X