View Full Version : Retro fit doors

24-09-2012, 07:02 PM
I have had a chap come through to me who wants to retro fit a pair of doors onto a non doored 5EXI, can this be done or has anyone had this done.
Thanks in advance

24-09-2012, 11:38 PM
I know that Marlin offer this service.

25-09-2012, 11:44 AM
Depending on the age of the chassis it can be easy or difficult. I know on the newer chassis it is the same for both you just cut 1 bar out if you want doors. On the older chassis it isn't as simple as that as you would be required to take the body off & then have to weld in the other supports in the side before cutting the top piece out.

Personally I wouldn't bother with doors.