Announcement

Collapse
No announcement yet.

Anyone identify these steel wheels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anyone identify these steel wheels

    I can't think what they are off so can anyone else identify these wheels ?

    Thanks.

    Paul H

  • #2
    Re: Anyone identify these steel wheels

    I dont think they are (off) anything Paul. Weller produced wheels in white and also in silver finish. In fact Marlin offered them in a 15inch size for Berlinettas before offering an alloy compomotive. These look the same to me whatever the dia may be, and of course PCD to suit Marina hub.

    Comment


    • #3
      Re: Anyone identify these steel wheels

      Originally posted by danny.nelson View Post
      I dont think they are (off) anything Paul. Weller produced wheels in white and also in silver finish. In fact Marlin offered them in a 15inch size for Berlinettas before offering an alloy compomotive. These look the same to me whatever the dia may be, and of course PCD to suit Marina hub.
      Thanks.

      I'm normally quite good at identifying parts but these stumped me.

      Paul H

      Comment


      • #4
        Re: Anyone identify these steel wheels

        Nice and skinny though, great for those snowy conditions.

        Adrian

        Comment


        • #5
          Re: Anyone identify these steel wheels

          Holes like an MGF but not as dished. Good question!

          Comment


          • #6
            Re: Anyone identify these steel wheels

            Car use to look like this so they may have been changed recently.Q50 UHB.jpg

            Comment


            • #7
              Re: Anyone identify these steel wheels

              If they are 13 inch they could be Triumph Spitfire?? What size are They??
              Ben Caswell probably not the last word on anything here!!

              Comment


              • #8
                Re: Anyone identify these steel wheels

                Found more pictures on owners photo album and I reckon they are Wellers by the blue / red band around the rim.


                Paul H

                Comment


                • #9
                  Re: Anyone identify these steel wheels

                  They are Wellers Paul.

                  Comment


                  • #10
                    Re: Anyone identify these steel wheels

                    Might be controversial but seeing Triumph / Marina PCD is same as MGF then PCD converters are easy to source "off the shelf" to allow fitment of a wide range of more common wheels.
                    For example -


                    Not use I'd use universal type but 3 3/4" to 100mm PCD available from other suppliers.

                    Paul H
                    Last edited by CompoSimmonite; 23-01-14, 06:39 PM.

                    Comment


                    • #11
                      Re: Anyone identify these steel wheels

                      Originally posted by CompoSimmonite View Post
                      Might be controversial but seeing Triumph / Marina PCD is same as MGF then PCD converters are easy to source "off the shelf" to allow fitment of a wide range of more common wheels.
                      For example -


                      Not use I'd use universal type but 3 3/4" to 100mm PCD available from other suppliers.

                      Paul H

                      I have tried to talk to Mike Satur on several occasions, spacers have always been out of stock. You could be lucky.
                      Offsets still need to be checked.

                      Comment


                      • #12
                        Re: Anyone identify these steel wheels

                        Make sure the spigots on the spacers fit the hub and the wheel rim exactly to maintain concentricity. If they are not then the spacer will not be cetralised and the centralisation of the wheel itself will be only governed by the wheel nut.
                        I had to swap my universal ones out because the lack of concentricity of both spacer and wheel rim was giving me wheel balance problems. (hope I am not teaching granny to suck eggs here).

                        Comment


                        • #13
                          Re: Anyone identify these steel wheels

                          Hi Paul,
                          In the Sportster section of the website there is thread "Louvres". Robert has answered with a reference to the following site:

                          Enjoy the videos and music that you love, upload original content and share it all with friends, family and the world on YouTube.


                          Have a look it is well worth it and you may have the answer to your question although I am inclined to agree with Danny. They do look like Weller wheels.

                          Comment


                          • #14
                            Re: Anyone identify these steel wheels

                            If anyone is interested Mike Satur has the MFG PCD adapters back in stock as from today.

                            Paul H

                            Comment

                            Working...
                            X