Hi everyone
I've just re-sealed the cam cover on my 1.7 O series engine - won't do that again in a hurry! To do the job you have to remove the distributor so now, having got it all back together and the dwell angle set I need to dynamically set the timing. The Haynes manual states the timing should be set for 14 degrees BTDC but doesn't mention if this is good for an unleaded engine. Can anyone advise?
Thanks
I've just re-sealed the cam cover on my 1.7 O series engine - won't do that again in a hurry! To do the job you have to remove the distributor so now, having got it all back together and the dwell angle set I need to dynamically set the timing. The Haynes manual states the timing should be set for 14 degrees BTDC but doesn't mention if this is good for an unleaded engine. Can anyone advise?
Thanks
Comment