Search:

How wide are you intending going with wheels / tyres ? What power unit are you running?

Frost Strip Gel

https://www.greatbritishcarjourney.com/

Link to previous post or just google as per title

Due to open mid 2021, a new venue here in Derbyshire - see above

Halfshafts are easy to remove, getting the outer hub bearing off the shaft isn't.

YouTube provides loads of solutions !!

I had mentioned Demon tweaks but didn't know if Escort ones would fit. What about getting a local blacksmith to make some?

As said above, all info you should need in those documents. Bare in mind that they are not 'off the shelf' and are likely to have a lead time of a couple of weeks.

A couple of possibilities
Demon tweaks have extended ones for Ford - 65 mm between legs
Sanderson Leaf springs or Owen springs both have a range of 'U' bolts ,probably worth a call

Agree with Andy, can't see anyone paying that sort of money and unlikely to go abroad for a substantial profit to be made due to 'Q' plate

If you don't already have a roof you will also need the cant rail. It's a glassfibre moulding that is attached to the forward edge of the hood material enabling the hood to be secured to the...

Nice to see that someone doesn't mind taking one out in poor weather. Credit to you!

As Mick used to work on submarines he'll no doubt pressure test the Roadster once finished!

My Alfa engined Roadster had a separate/remote voltage regulator despite if I remember it being a Bosch alternator. It looked like a slightly bigger version of the voltage stabiliser they use on...

I remember seeing that Roadster and talking to owner a couple of years back. It was at a Classic Car show D.S. and I attended in Derbyshire. Nice example!

Values on the up or someone desperate for paperwork?

S0ld mine for £35 for the pair! Someone got a real bargain. The new upright I got £70 for. As said previously I offered club members the chance but no takers.

Had a NOS suspension leg still in original wrapping, no-one here wanted that either. The trunnions I probably let go for less than I should have but that's life.
The purchaser of the trunnions...

Had a pair but now gone I'm afraid. No-one on here wanted them so ebay it was.

The only difficulty I recall with the earlier Cabrio's is the window winder mechanism is attached to the trim panel, later cars with the sculptured trim have a sub panel behind the main one to...

I realized my mistake while having dinner! I confess to probably having a senior moment as the image I had in my head no way resembled the set up on Marina /Roadster.
Must do better! Where have I...

How is the inner end of the lower arm located if you remove the torsion bar ? I'm assuming additional bracketry would need to be welded to the chassis rail otherwise you would 'hanging' the lower...

A classic car collection in Cheshire burnt to the ground in suspected arson attack. Owner said to be devastated .
I guess some are irreplaceable so whatever insurance he has won't compensate for the...

Telescopic shocks for front?

Never found much wrong with standard rears personally