Re: Marina 1.8tc clutch lever position
It's surprising how much flex in the bulkhead there is, even with a servo.
I fitted the factory modification albeit with servo in place it didn't go where Marlin intended it to.
Like Sidon suggested I piggybacked the chassis rail & underneath the servo.
Never did understand why Marlin recommended bracing it on the ally bonnet side when the chassis rail offered a much stronger locating point.
It's surprising how much flex in the bulkhead there is, even with a servo.
I fitted the factory modification albeit with servo in place it didn't go where Marlin intended it to.
Like Sidon suggested I piggybacked the chassis rail & underneath the servo.
Never did understand why Marlin recommended bracing it on the ally bonnet side when the chassis rail offered a much stronger locating point.
Comment