Announcement

Collapse
No announcement yet.

Stainless Manifolds for Hunter / Rover V8 engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stainless Manifolds for Hunter / Rover V8 engine

    I have recently struck gold!

    Found a local man who has jigs for making exhaust manifolds for my Rover V8 to fit the Cabrio / Hunter!

    Photos attached of the old / new. Note! - O/S manifold wrap removed on the old one to locate yet another cracked weld!

    I am currently fitting these with target completion ready for the S W Meet this coming Sunday 8th Feb. I always need deadlines to get things done!

    More pictures of final installation to follow.

    Peter.

    Near Side
    NS MAN rsz COMPARISON.jpg

    Off Side
    OS MAN rsz COMPARISON.jpg

  • #2
    Re: Stainless Manifolds for Hunter / Rover V8 engine

    Hello,
    My system was repaired by the manufacture under their 25 year guarantee, in 1994 with a cracked weld. The exhaust system was purchased with my Cabrio Kit (Chassis No 4-021-V8- 3.9 cc) in Feb 92 direct from Marlin Engineering - Paul Moorehouse (P M) and review/inspected by PM at the factory Oct 92. Both my manifolds are of a completely different design with only one very long and wide straight through box on the drives side.

    Paul
    ~~~~~~~~~

    Comment


    • #3
      Re: Stainless Manifolds for Hunter / Rover V8 engine

      I replaced my cracked manifold a while back and had a new exhaust fitted a few months later - As it was custom made I had them include a flexi to take the vibration and stress of the manifold. (see picture). Note also the seat support cross pieces on the wood floor - subject of an earlier thread.
      IMG_0095.JPG

      Comment


      • #4
        Re: Stainless Manifolds for Hunter / Rover V8 engine

        Originally posted by greyV8pete View Post
        I have recently struck gold!

        Found a local man who has jigs for making exhaust manifolds for my Rover V8 to fit the Cabrio / Hunter!

        Photos attached of the old / new. Note! - O/S manifold wrap removed on the old one to locate yet another cracked weld!

        I am currently fitting these with target completion ready for the S W Meet this coming Sunday 8th Feb. I always need deadlines to get things done!

        More pictures of final installation to follow.

        Peter.

        Near Side
        [ATTACH]5937[/ATTACH]

        Off Side
        [ATTACH]5938[/ATTACH]
        After a delay due to non car jobs this project is back on the burner. Have spent the last two days wrapping the manifolds and hope to have them fitted by this coming weekend. Photos to follow. Peter.

        Comment


        • #5
          Re: Stainless Manifolds for Hunter / Rover V8 engine

          New manifolds now fitted a last. Photos attached. Tickover seems much smoother than with the old manifolds. Hope to try a short run tomorrow. Then it's back to helping Happy Dave with his rear suspension Supaflex upgrade. Deadline completion is this Saturday so we will have both cars ready for the SW Meet this Sunday.

          Offside Exh Manifold Fitted
          OS EXH MAN FITTED.jpg

          Nearside Exh Manifold Fitted
          NS EXH MAN FITTED.jpg

          Peter.

          Comment


          • #6
            Re: Stainless Manifolds for Hunter / Rover V8 engine

            Wow, these manifolds are looking great. really nice.
            In my Marlin i have the original parts and they work good but they are not good looking .

            How was assembling? all fits properly together?
            Maybe you could send me PM with contact data of the "local man"
            hopefully he will send some parts across to germany.

            Comment


            • #7
              Re: Stainless Manifolds for Hunter / Rover V8 engine

              Deleted - just seen date of original post

              Comment


              • #8
                Re: Stainless Manifolds for Hunter / Rover V8 engine

                yes , had seen that these post is some month old.
                but i only want to ask if it is possible to get some information about the parts.

                Comment


                • #9
                  Re: Stainless Manifolds for Hunter / Rover V8 engine

                  Given the original design of the Rover/SD1 V8 and my limited knowledge, and at risk of making assumptions (AdminUser) does the exhaust manifold of an SD1 match any other of the V8 engines it was derived from?

                  An interesting doc I found some time ago is, http://www.vintagemodelairplane.com/.../Exhaust01.pdf A strange source address but interesting never the less.

                  Comment

                  Working...
                  X