Announcement

Collapse
No announcement yet.

CAD Drawing for a Roadster Dashboard

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CAD Drawing for a Roadster Dashboard

    I'm planning to re-work my dashboard this winter to finally replace the temporary dash that's lasted for 30 years! I was wondering if anyone had a CAD drawing that could us as a starting point to save me measuring and drawing up the existing dash. My plan is to get it laser cut to avoid wonky switches ad warning lights

    If not a dimensioned drawing would help...
    Mk2 SWB Marina Roadster with a 2.0L Pinto built in 1986

  • #2
    Re: CAD Drawing for a Roadster Dashboard

    That would help quite a few people. There are several free cad packages around.
    If one exists, send the drawing of the dash profile to Cirrus Laser in Burgess Hill, several others have used them on other projects.
    Once the outline is on file, all they need will be the instrument and switch locations relative to a datum point.

    But even a profile would help many, not just laser cut, but water jet etc.
    MOC member since 05/97
    1984 Marlin Roadster SWB.
    1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
    Three core radiator, Renault Clio vented front discs.
    The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.

    Loads of Marlin Reference can be found documents here or there.

    Comment

    Working...
    X