Announcement

Collapse
No announcement yet.

GT6 MK1 Crankshaft Pulley

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GT6 MK1 Crankshaft Pulley

    After much scratching of an already bald head I noticed that the dizzy is in the wrong position when at TDC, a few lead changes and hey presto, the drive is in the wrong position !
    Being a little OCD I decided to dig a little deeper and it turns out that the metalastic crankshaft pulley has slipped, the "rubber" now has the consistency of silicon.
    Please has anyone got the part I require.
    [email protected]

  • #2
    Re: GT6 MK1 Crankshaft Pulley

    Seems this is a more common problem than I had realized when I first read this post.

    Even the TR tech rep has learnt something today.

    Rimmers do an expensive replacement. In the meantime you could try marking the center section with TDC.
    Ben Caswell probably not the last word on anything here!!

    Comment

    Working...
    X