Click here to sign up  Click here to go to the galleries  Click here to go to the code of conduct  Click here to go to the video page  Click here to go to the SW Meets page

Thread: Ford Sierra Steering Column indicator cam

Results 1 to 5 of 5

Hybrid View

  1. #1 Ford Sierra Steering Column indicator cam 
    frequent forum contributor Club Member Tony Stott's Avatar
    Join Date
    Nov 2011
    Location
    By Douarnenez Bay Finistere
    Posts
    491
    Just taken the steering wheel off the column to find the plastic collar which cancels the turn indicators is a little worse for wear the lug which locates under the steering boss is non existant, any suppliers out there? is it easily replaceable with new or rebuild job if possible?
    Suggestions please!
    Reply With Quote  
     

  2. #2 Re: Ford Sierra Steering Column indicator cam 
    frequent forum contributor Club Member
    Join Date
    Mar 2013
    Location
    Fife, Scotland
    Posts
    545
    Reply With Quote  
     

  3. #3 Re: Ford Sierra Steering Column indicator cam 
    frequent forum contributor Club Member Tony Stott's Avatar
    Join Date
    Nov 2011
    Location
    By Douarnenez Bay Finistere
    Posts
    491
    Thanks Scott bought one, looked earlier using the Haynes manual description, didn't come up with anything, I hadn't used cancellation in my search doooohhhh lifes a bitch at times!
    once again many thanks
    Reply With Quote  
     

  4. #4 Re: Ford Sierra Steering Column indicator cam 
    frequent forum contributor Club Member Tony Stott's Avatar
    Join Date
    Nov 2011
    Location
    By Douarnenez Bay Finistere
    Posts
    491
    Ok seeking another piece of info re the indicator cancellation cam, should the cam be just an interference fit between the top bearing inner and the steering boss or should it be well clamped, the Haynes manual gives no info on this point.
    Reply With Quote  
     

  5. #5 Re: Ford Sierra Steering Column indicator cam 
    Club Member
    Join Date
    Nov 2011
    Posts
    441
    Quote Originally Posted by Tony Stott View Post
    Ok seeking another piece of info re the indicator cancellation cam, should the cam be just an interference fit between the top bearing inner and the steering boss or should it be well clamped, the Haynes manual gives no info on this point.
    I recently had to take the steering column out of my Sierra based car. The “Cam - direction indicator turn – off” has a lug that locates it in a slot on the steering wheel.

    The lug can just be seen on item 14 in this picture taken from http://www.fordopedia.org/parts-cata...erra-mk1/H1.10

    Ford indicator cam.jpg
    Reply With Quote  
     

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •