Announcement

Collapse
No announcement yet.

Exhaust System Rubber mount

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Exhaust System Rubber mount

    Greetings all from New Member Graham near Bristol.
    I am the new custodian of a Marlin Marina Sportster in need of two replacement rubber supports for the exhaust system. The present offending items are domed rubber blocks, each with one protruding steel thread. The Block is 5 cm wide with a domed radius of 3 cm. A transverse hole between to the two flat faces (distance between the two = 2.2. cm) is 0.9 cm in diameter.
    Any suggestions, please, as to where I might run these to ground?
    Many thanks for a pointer.

  • #2
    Re: Exhaust System Rubber mount

    Have you looked at https://www.clampcouk.co.uk/exhaust-...g-rubbers.html

    Loads of pictures for comparison!
    MOC member since 05/97
    1984 Marlin Roadster SWB.
    1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
    Three core radiator, Renault Clio vented front discs.
    The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.

    Loads of Marlin Reference can be found documents here or there.

    Comment


    • #3
      Re: Exhaust System Rubber mount

      Originally posted by stevejgreen View Post
      Thanks Steve, what an interesting collection of handy items!
      Marlin Hunter R500 ULA 1997 Ford-Based Hunter with 2.3 DOHC L4 engine, chassis/kit No. 157

      Comment

      Working...
      X