Click here to sign up  Click here to go to the galleries  Click here to go to the code of conduct  Click here to go to the video page  Click here to go to the SW Meets page
Results 1 to 10 of 12

Thread: Roadster roof

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1 Roadster roof 
    club member
    Join Date
    Nov 2016
    Posts
    1
    Looking for a roadster roof - any ideas?
    Reply With Quote  
     

  2. #2 Re: Roadster roof 
    club member Club Member
    Join Date
    Jul 2016
    Location
    St Austell, Cornwall
    Posts
    629
    There has been quite a few posts about soft tops and some that have found a company to make one.
    Search on here or in the true spirit of kit car ownership make one yourself, many have successfully.
    1275 Marina/Ital based LWB Roadster in the process of a ground up rebuild.
    Reply With Quote  
     

  3. #3 Re: Roadster roof 
    Moderator Club Member
    Join Date
    Nov 2011
    Location
    Derby
    Posts
    1,579
    If you don't already have a roof you will also need the cant rail. It's a glassfibre moulding that is attached to the forward edge of the hood material enabling the hood to be secured to the windscreen frame.
    Reply With Quote  
     

  4. #4 Re: Roadster roof 
    club member Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,706
    Back in 2013-14, on a MIG welding forum, these pics are from a selection of someone's roof construction on a Triumph based Roadster

    Does anyone know if the project was ever finished, and do you have any pics ?
    Attached Images
    Reply With Quote  
     

  5. #5 Re: Roadster roof 
    club member Club Member
    Join Date
    Jun 2015
    Location
    Kelsall Chester
    Posts
    774
    Somewhere in the Marlin Club there is a mould for a LWB Roadster. I have a shell off that mould which I am cutting to fit a SWB. Not easy and too cold. Cutting a section out and getting the edges to meet was fun. More cutting and laminating to do. But it is a nice top. The metal one above looks like a modified top from something else, no? A close look at the MIG welding is not pretty.
    Reply With Quote  
     

  6. #6 Re: Roadster roof 
    club member Club Member dcunn's Avatar
    Join Date
    Nov 2011
    Posts
    1,706
    The metal one is a scratch build (deffo from flat sheet) by someone who was learning to weld, two more pics :

    Trust you're staying well Dave ?
    Attached Images
    Reply With Quote  
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •