Click here to sign up  Click here to go to the galleries  Click here to go to the code of conduct  Click here to go to the video page  Click here to go to the SW Meets page
Results 1 to 3 of 3

Thread: Indicator stalk

  1. #1 Indicator stalk 
    club member Club Member
    Join Date
    Sep 2020
    Posts
    16
    HI ALL.!!
    I tried repairing my indicator stalk.... bad mistake.!! after removing the two securing screws and lifting it off, bits went flying everywhere.!! lol.! springs and little ball bearings just disappeared in front of my eyes.!
    Anyway after spending what seemed like days searching on the net, not a replacement was to be found... there is plenty of similar ones but the mounting plates are slightly different, and as for the plug, I didnt see one that was like mine.....
    my question is, if i bought the "Similar" one, would i be able to tranfer it on to my backing plate, and can i cut the wires and solder them to my old plug.l........or ami I creating bigger problems for myself....
    cheers.
    john.
    Reply With Quote  
     

  2. #2 Re: Indicator stalk 
    club member Club Member jon_cox's Avatar
    Join Date
    Nov 2011
    Posts
    524
    Hi John.
    Can you post a picture or offer a part number for the one you have. I have a selection of spares that might be able to help.
    Jon
    Reply With Quote  
     

  3. #3 Re: Indicator stalk 
    club member Club Member
    Join Date
    Sep 2020
    Posts
    16
    Hi Jon.
    Sorry for the late reply, i have Builders at the house so its a bit hectic to say the least..!!
    The Part # is...... 33748A3273 or the last digit could be o (zero)...
    unfortunately, i havnt mastered how to upload a photo yet.!

    cheers Jon, i appricate your help.

    john
    Reply With Quote  
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •