Announcement

Collapse
No announcement yet.

The matrix

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • The matrix

    Hi peeps
    I have a cabrio with 2.8 v6 cologne engine and the rest is ford Sierra based.
    I need to change my heater matrix can anyone guide me on this as i can only see the way to get it out is to remove the pedals is this the only way

  • #2
    Re: The matrix

    That's how I've done it in the past - otherwise it's a dash out job. Once pedals are out of way it's a cinch but do give yourself plenty of room and take out seat and steering wheel.

    Comment


    • #3
      Re: The matrix

      Thank you I'll be tackling it this week at some point

      Comment


      • #4
        Re: The matrix

        I removed centre console and dashboard after which you can remove the whole heater unit. Not tried getting just the matrix out. Doug

        Comment


        • #5
          Re: The matrix

          I remember when I built FMB the heater was the first thing that went in!! I remember thinking I bet that is a swine to get out.

          Comment


          • #6
            Re: The matrix

            I have been told it can be done by removing the steering colum and open a bleed nipple on the brakes yo allow the brake peddle to be press down to the floor also press clutch pedal down and the matrix will just about come out.
            Sounds good to me20210428_121852.jpg

            Comment

            Working...
            X